- Simulation
- Control
- Macros
- Planner
- Threading
Drag to see moves
Show Cut Moves
Drag to see moves
Send GCode to Nano ELS H4
Fast
Slow
Tool
Move
GCode Responses
Progress...
Send single command
Send multi line commands
Macros
Coming soon. Use macros to define commmon tasks. For example profile 10mm from current position
Planner
Use this tool to create a job of tasks to execute. This can be manual, gcode, button press
emulation or a
combination
of them.
When you click execute the job wizard will execute the tasks one after another. Each task
with require confirmation to start.
Device status
Current Job
Drag an available task to belowAvailable Tasks
Drag here to delete
Task Collections
Coming soon.
Not Connected
Please connect to the controller before executing jobs
Manual Task Instructions
CNC Task Gcode
Current Gcode Line:
Current Feedrate:
Execution in progress...
Key Emulation Task
Execution in progress...
All Tasks Complete
Job Cancelled
×
Save Job
Pick a name:
New Job name:
×
Export Job
Select Job To Export:
×
Which collection would you like to save the tasks to?
New Collection Name:
×
Add a new task
Task Name:
Task Type:
Task Description:
Task GCode:
Use built in controller functions by emulating button presses
Simply click the buttons you want to emulate to build up a sequence which will be
displayed at the bottom. Each emulated press will have a 500ms delay between them.
Tip: Hover over the buttons for a description.
Tip: Hover over the buttons for a description.
Emulated sequence: Tip: Drag to reorder or delete
Drag here to delete
Collection to save to:
New Collection Name:
×
This tool is designed to be used in conjunction with LatheCode:
Please note that this tool is to be used at your own risk and I cannot gaurentee that
it will work. This tool targets my custom fork of the H4 firmware which you can find
here: https://github.com/Festivejelly/nanoels
How to use:
- Use LatheCode to generate the G-code, then paste it into this tool.
- You can also write the G-code by hand for simple operations such as boring or grooving. Click here to load an example.
- Click "Simulate" to plot the moves onto the canvas.
- movement lines marked with "; cut" will show in red.
- movement lines marked with "; travel" will show in green.
- movement lines marked with "; retract" will show in orange.
- movement lines not marked will default to green.
- All other moves will be considered travel moves and will show in green.
- Any G-code you paste or write can be saved into the browser's local storage. This is useful for saving common operations.
- When you're ready, you can send the G-code to the Nano ELS H4 by clicking "Send."
- More functionality to come soon! Version 0.2
- Please provide feedback, raise issues or make suggestions here: https://github.com/Festivejelly/LatheGcodeVisualiser
×
Drag to see moves
Drag to see moves
Show Cut Moves